Year : 2010  |  Volume : 2  |  Issue : 3  |  Page : 216-222 Table of Contents     

Fast dissolving sublingual films of ondansetron hydrochloride: Effect of additives on in vitro drug release and mucosal permeation

Department of Pharmaceutics, Nitte Gulabi Shetty Memorial Institute of Pharmaceutical Sciences, Mangalore - 574 160, Karnataka, India

Date of Web Publication27-Jul-2010

Correspondence Address:
M Koland
Department of Pharmaceutics, Nitte Gulabi Shetty Memorial Institute of Pharmaceutical Sciences, Mangalore - 574 160, Karnataka
Login to access the Email id

DOI: 10.4103/0975-1483.66790

PMID: 21042474

Get Permissions


Ondansetron hydrochloride, a 5 HT3 antagonist is a powerful antiemetic drug which has oral bioavailability of 60% due to hepatic first pass metabolism and has a short half-life of 5 h. To overcome the above draw back, the present study was carried out to formulate and evaluate fast dissolving films of ondansetron hydrochloride for sublingual administration. The films were prepared from polymers such as polyvinylalcohol, polyvinyl pyrrolidone, Carbopol 934P in different ratios by solvent casting method. Propylene glycol or PEG 400 as plasticizers and mannitol or sodium saccharin as sweeteners were also included. The IR spectral studies showed no interaction between drug and polymer or with other additives. Satisfactory results were obtained when subjected to physico-chemical tests such as uniformity of weight, thickness, surface pH, folding endurance, uniformity of drug content, swelling index, bioadhesive strength, and tensile strength. Films were also subjected to in vitro drug release studies by using USP dissolution apparatus. Ex vivo drug permeation studies were carried out using porcine membrane model. In vitro release studies indicated 81-96% release within 7 min and 66-80% within 7 min during ex vivo studies. Drug permeation of 66-77% was observed through porcine mucosa within 40 min. Higher percentage of drug release was observed from films containing the sweeteners. The stability studies conducted for a period of 8 weeks showed no appreciable change in drug content, surface pH, and in vitro drug release.

Keywords: Fast dissolving films, ondansetron, polyvinyl alcohol, solvent casting, sublingual films

How to cite this article:
Koland M, Sandeep V P, Charyulu N R. Fast dissolving sublingual films of ondansetron hydrochloride: Effect of additives on in vitro drug release and mucosal permeation. J Young Pharmacists 2010;2:216-22

How to cite this URL:
Koland M, Sandeep V P, Charyulu N R. Fast dissolving sublingual films of ondansetron hydrochloride: Effect of additives on in vitro drug release and mucosal permeation. J Young Pharmacists [serial online] 2010 [cited 2013 Apr 19];2:216-22. Available from: /text.asp?2010/2/3/216/66790

   Introduction Top

Fast mouth dissolving films have become popular as a new delivery system because they are easy to administer and sudden-onset of drug action is possible as the films are taken through the sublingual route. Since the sublingual mucosa is relatively permeable because of thin membrane and is highly perfused, rapid drug absorption and instant bioavailability is possible and this leads to quick-onset of drug action. Since the drug is directly absorbed into the systemic circulation, degradation in the gastrointestinal (GI) tract and first pass effect can be avoided. [1] Moreover, better patient compliance is expected, because this system does not require being swallowed as in the case of conventional tablet, and therefore beneficial in patients with dysphagia or difficulty in swallowing. The use of mucoadhesive polymers in the films will enable them to adhere to the sublingual mucosa for better retention and drug absorption. [2] Ondansetron, a 5HT 3 antagonist is a potent antiemetic drug, which is used in control of nausea, vomiting associated with cancer chemotherapy. It exhibits only 60-70% of oral bioavailability because of first pass metabolism and has a relative short half-life of 3-5 h. [3] Studies have shown that ondansetron hydrochloride is well absorbed through the buccal or sublingual mucosa. [4] In view of all the above reasons, this study will be an attempt to optimize the therapeutic effect of ondansetron by formulating as fast mouth dissolving films for sublingual use.

   Materials and Methods Top


Ondansetron hydrochloride was obtained as a gift sample from Sun Pharma Pvt, Ltd., Ahemadabad. Carbopol 934P and Polyvinyl alcohol was obtained from CDH Laboratory. Polyvinyl pyrolidone K-30 was procured from Ozone International, Mumbai. Mannitol and saccharin sodium were laboratory grade ingredients from Loba Chemie, Mumbai.

Preparation of fast dissolving ondansetron hydrochloride film

Fast dissolving films were prepared by solvent casting method [5] (Weinberger, 1987). Aqueous solution I was prepared by dissolving polymer in 20 mL hot water (80°C) with stirring to produce a clear solution and kept for 1 h to remove all the air bubbles. [6] In the case of the FC formulations, Carbopol 934P was first dissolved in a small portion of distilled water, neutralized with triethanolamine and then added to the cooled Poly Vinyl Alcohol (PVA) solution. Aqueous solution II was prepared by dissolving pure drug, sweetener, and plasticizer in specific proportion in distilled water. The aqueous solutions I and II were mixed and stirred for 1 h. The solutions were cast on to 9-cm diameter  Petri dish More Details and were dried in the oven at 45°C for 24 h. The films was carefully removed from the Petridish and checked for any imperfection and cut according to size required for testing (square film 2 cm length, 2 cm width) so that each film contained 4 mg of the drug. The samples were stored in a glass container maintained at temperature 30 °C and relative humidity 60% ± 5% until further analysis [Table 1]. [2]

Determination of physicochemical parameters

The average weight each of 10 samples of each formulation was determined. The thickness of each of sample was measured using micrometer screw gauge at five locations, and the mean thicknesses were calculated. [6] The folding endurance was determined by repeatedly folding one film at the same place till it broke or folded up to 300 times which is considered satisfactory to reveal good film properties. The number of times the film could be folded at the same place without breaking gives the value of the folding endurance. The surface pH of films was determined to investigate the possible side effect because of change in pH in vivo, since an acidic or alkaline pH may cause irritation to buccal mucosa. The film to be tested was placed in a Petri dish and was moistened with 0.5 mL of distilled water and kept for 30 s. The pH was noted after bringing the electrode of the pH meter in contact with the surface of the formulation and allowing equilibrating for 1 min. The average of 10 determinations for each of the formulation was taken. [7] The results for all the films are shown in [Table 2]. The film formulations were also subjected to IR spectral studies to determine compatibility between drug and other components in the films.

Measurement of swelling index

The studies for swelling index of the film were conducted in simulated salivary fluid of pH 6.75. The film sample (surface area 4 cm 2 ) was weighed and placed in a preweighed stainless steel wire sieve of approximately 800-μm mesh. The mesh containing the film sample was submerged into 50 mL of simulated salivary medium contained in a mortar. At definite time interval (30 s), the stainless steel mesh was removed, excess moisture removed by carefully wiping with absorbent tissue and reweighed. Increase in weight of the film was determined at each time interval until a constant weight was observed. [8] The degree of swelling was calculated using the formula

where SI is the swelling index, Wt is the weight of the film at time 't', and Wo is the weight of film at t = 0.

Tensile strength measurement

This mechanical property was evaluated using Instron Universal Testing Instrument (model F. 4026), Instron Ltd., Japan, NITK, Surathkal) with a 5-kg load cell. Film strips in special dimension and free from air bubbles or physical imperfections were held between two clamps positioned at a distance of 3 cm. During measurement, the strips were pulled by the top clamp at a rate of 100 mm/min; the force and elongation were measured when the film broke. Results from film samples, which broke at and not between the clamps, were not included in the calculations. Measurements were run in triplicate for each film.

Two mechanical properties namely, tensile strength (TS) and percentage elongation were computed for the evaluation of the film. TS is the maximum stress applied to a point at which the film specimen breaks and can be computed from the applied load at rupture as a mean of three measurements and cross-sectional area of fractured film from the following equation. [6]

Percentage elongation can be obtained by following equation:

Uniformity of drug content

This parameter was determined by dissolving one film of dimension 2 cm Χ 2 cm containing 4 mg of ondansetron hydrochloride by homogenization in 100 mL of stimulated saliva of pH 6.8 for 30 min with continuous shaking. From this, 10 mL was diluted to 50 mL with simulated salivary fluid. The absorbance was measured at 248 nm using an UV spectrometer. The experiments were carried out in triplicate for the films of all formulations and average values were recorded and given in [Table 2].

In vitro dissolution studies

Dissolution profile of fast dissolving films of ondansetron hydrochloride was carried out using USP type II (paddle apparatus) with 300 mL of simulated salivary fluid (pH 6.8) as dissolution medium maintained at 37 ± 0.5 °C. Medium was stirred at 100 rpm. Samples were withdrawn at every 30 s interval, replacing the same amount with the fresh medium. [2] Absorbance was determined by UV spectrophotometer at 248 nm.

Ex vivo permeation studies through porcine oral mucosa

Permeation studies were carried using the modified Franz diffusion cell of internal diameter of 2.5 cm. Porcine oral mucosa was used as the model membrane. The buccal pouch of the freshly killed pig was procured from the local slaughter house. The buccal mucosa was excised and trimmed evenly from the sides and then washed in isotonic phosphate buffer of pH 6.6 and used immediately. The membrane was stabilized before mounting to remove the soluble components. The mucosa was mounted between the donor and receptor compartments. The receptor compartment was filled with 200 mL of isotonic phosphate buffer of pH 7.4 which was maintained at 37 °C ± 0.2 °C and the hydrodynamics were maintained by stirring with a magnetic bead at 50 rpm. One film of dimensions 2 cm Χ 2 cm and previously weighed was placed in intimate contact with the mucosal surface of the membrane that was previously moistened with a few drops of simulated saliva. The donor compartment was filled with 1 mL of simulated saliva of pH 6.8. Samples were withdrawn at suitable interval, replacing the same amount with the fresh medium. [9],[10] The percentage of drug permeated was determined by measuring the absorbance in a UV-Visible spectrophotometer at 248 nm.

Ex vivo mucoadhesion time and drug release

The ex vivo mucoadhesive time was performed by application of the film on freshly cut porcine buccal mucosa. The porcine tissues were fixed on the internal side of a beaker with cyano acrylate glue. The film was wetted with 50 μL of simulated saliva fluid and was pasted to the porcine buccal tissue by applying a light force with a fingertip for 20 s. The beaker was filled with 200 mL simulated saliva fluid and kept at 37 °C. After 2 min, a 50-rpm stirring rate was applied to simulate the buccal cavity environment and during the test, the time taken for the film to completely erode or detach from the mucosa was observed as the ex vivo mucoadhesion time. A 5-mL sample was withdrawn at every 30-s time interval, replacing the same amount with fresh medium. [11] After filtration, the amount of drug in the withdrawn samples was determined by UV spectrophotometer at 248 nm.

Stability studies

The film formulations were also subjected to stability studies by storing them for 8 weeks under environmental conditions such as room temperature of 27 ± 2 °C/65% RH, oven temperature of 40 ± 2 °C/75% RH and in the refrigerator at 4-8 °C. At the end of the period, drug content, swelling index, surface pH, and release profiles were determined.

   Results and Discussion Top

Ondansetron film formulations were designed with the objective of immediate release of the drug for improved patient compliance and better bioavailability. Therefore, rapidly water-soluble polymers such as PVA and PVP were chosen for the formulation with Carbopol for conferring mucoadhesive properties.

All the fabricated film formulations prepared were smooth, almost transparent with good flexibility. It was observed that result of uniformity of weight; thickness and drug content were satisfactory with respect to variation of these parameters between films of same formulation. The surface pH was close to neutral in all the formulations, and this means that they may have less potential to irritate the buccal mucosa, therefore more comfortable. All film formulations exhibited good folding endurance exceeding 300, indicating that they are tough and flexible.

The result of IR studies showed no interaction between drug, polymer, or excipients with in the formulations. The swelling index evaluation indicated that the formulations containing mannitol, i.e., FA 2, FB 2, FC 2 exhibited less extent of swelling as compared to other formulations. The reason may be due to the presence of mannitol, which is hydrophilic, since water-soluble salt and sugar increase the erosion of the polymer. From this, it is understood that the mannitol will cause the disintegration of formulation faster compared to formulation without sweetners and formulation containing sodium saccharin, which is also water-soluble salt but used in lesser concentrations as compared to mannitol. Maximum swelling was observed for the formulation containing Carbopol as compared to those formulations containing PVP as mucoadhesive polymer. The swelling index profile for different films is shown in [Figure 1].

The TS gives an indication of the strength and elasticity of the film reflected by the parameters, tensile strength (TS) and elongation at break (E/B). A weak and soft polymer is characterized by a low TS and E/B; a hard and brittle polymer shows a moderate TS and low E/B; a soft and tough polymer is characterized by a moderate TS and high E/B whereas a hard and tough polymer shows a high TS and E/B. The results of TS and percentage elongation of all the formulation containing sweetners are shown in [Table 3].

The formulation containing mannitol exhibited lower TS and % elongation compared to the others. This indicates that the presence of water-soluble compound such as mannitol and sugars in higher concentration tend to make the polymer softer and less tough and therefore poorer tensile strength and percentage elongation.

From in vitro drug release studies, it was found that from all three set of formulation (FA, FB, and FC), it was found that formulation containing mannitol showed high-percentage release compared to others. The formulation FA 2 showed a maximum percentage drug release of 95.69% in 360 s followed by the formulation FB 2 and FC 2 of 92.59% in 330 s and 85.67% in 420 s, respectively. The order of drug release in each set of formulation can be given as:

FA 2 > FA 3 > FA 1

FB 2 > FB 3 > FB 1

FC 2 > FC 3 > FC 1

The in vitro percentage drug release of all formulation is given in [Table 4]. The percentage amount of drug released is plotted against time to obtain the release profiles as shown in [Figure 2].

From ex vivo drug release studies, it was found that formulation-containing mannitol showed highest percentage release compared to other formulations. The formulation FA 2 showed a drug release of 79.69% in 330 s. Among the other formulations, it was found that formulation FB 2 and FC 2 showed better percentage drug release. The order of drug release in each set of formulation can be given as:

FA 2 > FA 3 > FA 1

FB 2 > FB 3 > FB 1

FC 2 > FC 3 > FC 1

The percentage amount of drug released is plotted against time to obtain the release profiles as shown in the [Figure 3]. During the ex vivo drug release study, the residence time for the formulation, i.e., the time taken for the patch to detach or erode completely from the mucosa was observed, and it was found that the FC films took longer time, probably due to their carbopol content.

Permeation studies through oral mucosa indicated that the extent of permeation of ondansetron hydrochloride from formulations containing mannitol was observed to be much higher than other formulation. The formulation FA 2 showed the highest percentage of drug permeated, i.e., 77.01% in 30 min. The percentage drug permeated was plotted against the time to obtain the profiles as shown in [Figure 4].

The results of stability studies of ondansetron hydrochloride fast dissolving films showed no significant change with respect to drug content, surface pH, swelling index, and in vitro drug release at the end of 8 weeks when stored in above-mentioned conditions.

   Conclusion Top

The use of water-soluble sweeteners, especially mannitol not only enhanced the taste of the ondansetron containing films, but also increased drug release and drug permeation through oral mucosa. On the basis of data obtained from in vitro dissolution and ex vivo permeation studies that FA 2 and FB 2 are promising formulations suitable for the immediate release of ondansetron for systemic use since they exhibited maximum drug release and permeation, respectively.

   Acknowledgments Top

The authors thank Sun Pharma Pvt. Ltd., Ahmedabad for the gift sample of ondansetron hydrochloride and the staff of the Mechanical Engineering Department, NIITK, Suratkal for helping with the use of the tensile strength testing equipment, Instron.

   References Top

1.Jain NK. Controlled and novel drug delivery. 1 st ed. India: CBS Publishers and Distributors; 2004. p. 52-74.  Back to cited text no. 1      
2.Mashru RC, Sutariya VB, Sankalia MG, Parikh PP. Development and evaluation of fast dissolving film of salbutamol sulphate. Drug Dev Ind Pharm 2005; 31:25-34.  Back to cited text no. 2  [PUBMED]  [FULLTEXT]  
3.Kathleen P. Martindale. The complete drug reference. 32 nd ed. Massachusetts: Pharmaceutical Press; 1999. p. 1206-7.   Back to cited text no. 3      
4.Tripathi KD. Essentials of Medical Pharmacology. 5 th ed. New Delhi: JP Medical Publishers; 2003. p. 606-7.   Back to cited text no. 4      
5.Weinberger M. Pharmacological management of asthma. J Adolescent Health Care 1987; 8(1): 74-83.  Back to cited text no. 5      
6.Nafee NA, Boraie NA, Ismail FA, Mortada LM. Design and characterization of mucoadhesive buccal patches containing Cetylpyridinium chloride. Acta Pharm 2003; 53:199-212.  Back to cited text no. 6  [PUBMED]    
7.Bottenberg P, Cleymaet R, de Muynck C, Remon JP, Coomans D, Michotte Y, et al. Development and testing of bioadhesive and fluoride containing slow release tablets for oral use. J Pharm Pharmacol 1991; 43:457-64.  Back to cited text no. 7  [PUBMED]    
8.Peh KK, Wong CF. Polymeric films as vehicle for buccal delivery: swelling, mechanical, and bioadhesive properties. J Pharm Sci 1999; 2:53-61.  Back to cited text no. 8      
9.Patel MV, Prajapati BG, Patel MM. Effect of hydrophilic polymers on buccoadhesive Eudragit patches of Propranolol hydrochloride using factorial design. AAPS PharmSciTech 2007; 8: Article 45.  Back to cited text no. 9      
10.Semalty M, Semalty A, Kumar G. Formulation and characterization of mucoadhesive buccal films of glipizide. Indian J Pharm Sci 2008; 70:43-8.  Back to cited text no. 10  [PUBMED]  Medknow Journal  
11.Perioli L, Ambrogi V, Angelici F, Ricci M, Giovagnoli S, Capuccella M, Rossi C. Development of mucoadhesive patches for buccal administration of ibuprofen. J Control Rel 2004; 97:269-79.  Back to cited text no. 11      


  [Figure 1], [Figure 2], [Figure 3], [Figure 4]

  [Table 1], [Table 2], [Table 3], [Table 4]

This article has been cited by
1 Orally fast dissolving films: Innovations in formulation and technology
Bhyan, B., Jangra, S., Kaur, M., Singh, H.
International Journal of Pharmaceutical Sciences Review and Research. 2011; 9(2): 50-57
2 Formulation and characterization of fast dissolving buccal films: A review
Mahajan, A., Chhabra, N., Aggarwal, G.
Der Pharmacia Lettre. 2011; 3(1): 152-165


    Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
    Access Statistics
    Email Alert *
    Add to My List *
* Registration required (free)  

  In this article
    Materials and Me...
    Results and Disc...
    Article Figures
    Article Tables

 Article Access Statistics
    PDF Downloaded245    
    Comments [Add]    
    Cited by others 2    

Recommend this journal